IS A RAT OR MOUSE? KNOW THE DIFFERENCE!

Rat is a different mouse. In fact, the pest control service should be called rodent control, not control mice, because of the rodent species.

But the fact is that when we see a rodent, mind screams soon: a mouse! So it is easier to use the generic nomenclature of rats for all rodents considered urban pests (about 50 species, most of the Muridae family).

Learn the differences between mice and rats, so you can identify them correctly the next time you catch sight of a rodent.

MOST COMMON SPECIES OF RODENTS

Among the species of rodents that plague urban areas in Brazil, three stand out: the mouse ( Mus musculus ), a rat ( Rattus overgives ) and the lining rat ( Rattus rattus ).

We will separate them into two groups to get to easier identification: mouse (rat and lining mouse) and mice. See the illustration below to learn what you should observe to differentiate mice rats!

MOUSE IS GETTING SMARTER? CALL An IMUNISERVICE!

They do not fall into traps more? Poison flee you put it? Nor cats can hunt them?

If homemade methods do not solve your problem with rodents, it’s time to make a service pest control.

Out of the game, know that rats and mice easily adapt to any environment and learn from your mistakes.

Using homemade methods to combat rodents is not recommended. In addition to taking risks when handling poisons, the person can exacerbate the problem of infestation. So we have diversified strategies for the control of rodents.

COMBATING THE RODENTS

To trace the correct strategy is necessary to analyze the behavior and biology of the animal. Our employees are constantly trained by highly trained biologists, as the Marcio Alves, master of rodent control by the University of Reading (England).

The training combined with the use of products and the latest technology guarantee the success of our pest control services.

For example, in places where it is not possible to use rodenticides, our team will install PEP boxes (permanent poisoning point) strategically placed.

These boxes are closed and highly resistant. Inside baits attract rodents, entering through a small hole.

It is a safe method, widely used in environments with pets, children, or in establishments that handle food or medicine.


How to Plant Cucumber

The cucumber is a climbing plant, whose branches can grow from 1 to 3 m in length. Its fruits are usually consumed yet immature, raw or canned. (source: zyto.us)

Climate

The cucumber prefers warm weather, growing well in places with temperatures between 18 ° C and 30 ° C. In regions subject to frosts and low temperatures, the cucumber can be grown inside greenhouses. The plant should not be grown in a place exposed to the wind.

Brightness

The cucumber grows best in high light conditions, with direct sunlight at least a few hours a day.

Ground

Plant in soil rich in organic matter, fertile and well drained. This plant does not need a soil rich in nitrogen. The ideal soil pH is 5.5 to 6.8.

Irrigation

The cucumber must be irrigated with the necessary frequency so that its roots never become dry, but without the soil is soaked.

Planting

Cucumber seeds do not germinate well at temperatures below 20 ° C. Sow preferably directly in the garden, because the seedlings do not support the transplant well. However, if you wish or are convenient (for example, if your region has cold winters and you want to plant in early spring, when there is still a risk of low temperatures), seeds can be sown in pots, cups made of newspaper, kept in heated places, and then carefully transplanted to the final location. The seeds can be sown at 2 or 3 cm depth, and germination takes 5 to 15 days.

The indicated spacing for the cucumber can vary greatly with the cultivar and method of cultivation. In tufted cultivation, the spacing can generally be 60 cm to 1 m between the crop lines and 45 to 50 cm between the plants. For cultivation of creeping plants, the spacing can be 2 m between rows and 75 cm to 1 m between plants. For the production of cucumber destined for canning, the spacing can be from 1 m to 1.2 m between the crop lines and from 20 cm between the plants.

It is possible to grow cucumbers in pots that are at least 30 cm in diameter and depth, but most cultivars do not grow and produce well under these conditions.

Cultivation

The cucumber can be cultivated as a creeping plant or can be tutored, then growing on a fence, a trellis, an arbor, etc. There are a few cultivars that form clumps and do not spread across the land.

The tips of the main branches can be cut to promote a greater branching of the plants. For tufted plants, this should only be done when the branches reach the full height of the support.

Most of the cultivars need the presence of bees for the pollination and consequent formation of the fruits. A few cultivars are parthenocarpic, that is, they present the formation of the fruit without the occurrence of pollination. These cultivars usually produce only female flowers, but occasionally they can produce some male flowers, which can be removed. In these cultivars, pollination should be avoided because the fruits lose quality if they produce seeds. To do this, either prevent the bees from reaching the flowers, for example by doing the cultivation inside an enclosed greenhouse or do not plant other cucumber cultivars nearby. (Source: wikihow.com)

Harvest

Cucumber harvest usually begins 30 to 70 days after planting, depending on the cultivar, the purpose (pickles are harvested earlier) and the growing conditions. Harvesting the fruits of most cultivars should be done when they are well developed, but before they begin to ripen. The cucumber destined for canning is harvested still young when it is from 3 cm to 9 cm in length. The cucumber is an annual plant.


AMD Threadripper 1950X vs Intel i9 7960X

With the confirmation of AMD Threadripper technical specifications coming to market in August, AMD has outlined what promises to be an interesting consumer dispute that seeks high-tech and superior performance on their computers.

Core i7 and Core i9: see what has changed between the two Intel processors

What attracts attention are the competitive prices of AMD’s 16-core super processors compared to Intel’s already announced figures for the i9 7960X processor, which also offers 16 cores and will reach the market costing $ 900 more than its competitor (R $ 2,890, in direct conversion without taxes).

 

Specifications: Threadripper 1950X

Both processors have 16 cores and 32 threads. In terms of speed, according to AMD, the processor operates between 3.4 and 4.0 GHz. The Intel Core most similar to the announcement of AMD is the i9 7900X model, which adds ten cores, and has speeds between 3.3 and 4.3 GHz. an accuracy of the 7960X have not yet been revealed by Intel.
The advantage of the AMD processor lies in the CPU’s ability to operate with 60 PCIe lines in contrast to the 44 supported on all i9s launched by Intel to date. This is important because it is through PCIe interfaces that the user installs video cards, high-performance SSDs, and other specialized peripherals in cases of computers with the more professional application.

Performance: tie

At the moment, there are no independent comparisons between the two CPUs that can safely determine which of the two is better and therefore the fairer result is even the draw, no matter how clues point the AMD super processor as the winner. If AMD numbers are realistic, Threadripper has considerable processing advantages by powering multiple cores.
This may be due to a feature created by AMD on Ryzen processors, of which Threadripper is a part: SMB intelligently applies idle portions of the CPU to improve performance in applications that take advantage of multiple processing cores.

Compatibility: tie

Both Threadripper and i9 require the consumer to invest in new hardware. At the very least, you will need to purchase a new motherboard: in the case of AMD, unlike the socket AM4 used by all Ryzen, the Threadripper fits into the new TR4 platform. Intel repeats the same approach: the i9, and in fact any processor in the Extreme series, needs an LGA 2066 socket.


Know What Processor is and What its Function

A processor is a kind of specialized microchip. Its function is to accelerate, address, solve or prepare data depending on the application. Basically, a processor is a powerful calculator: It receives a certain amount of data, oriented in binary pattern 0 and 1 and has the function of responding to that volume, processing the information based on instructions stored in its internal memory.

Control Unit

The term “electronic brain” is far from classifying and summarizing the operation of a processor. However, the Control Unit is the closest to a brain within the processor. This controller defines the operating and ordering order of the various processor tasks.

Importance of Clock

Having more or less Hertz means how much the processor exchanges data with the system. The 2.0 GHz processor can perform 2 billion cycles per second.
The clock circuit, which measures the cycles and guides the pace of the information exchange flow in the processor, is one of the main criteria for establishing the processor speed. It is worth noting, however, that other points enter this account, such as memory interface, cache quantity, architecture, among others.

Applications

There are several types of processors and each type of application requires a certain type of processor. This is the case with our computers, which use x86.

Compact devices with fewer types of applications use different types of processors. The cell phone, regardless of the level of sophistication, uses a SoC processor ( an acronym for System on a Chip: system on a chip). This means that the processor in question adds several other features, such as radio chip, connectivity, graphics processor, and more.

Basically, any chip that controls some hardware is a processor. It receives data, addresses it, and returns it processed. A network card, a Bluetooth adapter and even a pen drive have controllers.

GPUs and parallelism

This explains why newer supercomputers are built by adopting GPU clusters.

Although they are not a match for logical processing of CPUs, graphics processors are ideal for a large volume of data.


What is RAM and What is its Function?

RAM is a type of technology that allows access to files stored on the computer. Unlike HD memory, RAM does not permanently store content. It is responsible, however, for reading the contents when required. That is, in a non-sequential way, therefore, the English nomenclature of Random Access Memory (Random Access Memory).

To simplify the logic behind the function of RAM, it is possible to make an analogy with a study table, where all the necessary material to carry out the homework is gathered: such as pens, pencils, notebook, and books. The materials would be the files and the RAM, the table, where everything comes together and the work are done. Source: pc-drive.com

Thus, RAM can be understood as a temporary work space, because after the task is done, the files (study material) are removed from the memory (table) and kept in the HD (cabinet).

How it works

Just like the desktop, the larger the RAM, the greater it is working capacity. But table capacity is measured in area. The larger the table area, the more books fit and the faster the work gets done. Already the capacity of the RAM memory is measured by the bit stream supported in the operations.

That is, if you access a large amount of memory in the HD at one time, as many current programs require, you need a lot of RAM. These are, therefore, the megabytes or gigabytes that appear in the configurations.
RAM is a microprocessor-like chip made up of millions of transistors and capacitors. The capacitor is a part capable of storing electrons. When it is loaded, the system does a reading based on the famous binary code of “zeros and ones”. Each reading of this in zero or one means a bit of information. This reading is done very fast, it’s many in a few thousandths of a second. This is how RAM processes all the actions performed by the user.

Width and bus speed

Other characteristics that influence the processing power of RAM are the width and speed of the bus, which is a set of “wires” responsible for connecting the memory to the other components.
The width tells us the number of bits that can be sent to the CPU simultaneously. Speed is the number of times that group of bits can be sent every second.

The memory communicates with the CPU, exchanging data, and complete what is known as a bus cycle. It is this period which presents memory performance which, can be 100MHz and 32bit, for example. This means that such memory is capable of sending 32 bits of data to the processor 100 million times per second. However, there is an effect called latency, which delays the data transfer rate significantly when sending the first bit.
When buying a memory you should be aware of this transfer rate issue. It is useless for memory to have a high frequency and the system frequency to be lower because the system rate will limit that of RAM. So for a system that runs at 100MHz and 32bit, buy a memory with the same features.


Nausea and often Get Sulfur Burps, am I pregnant?

Pregnancy occurs when the sperm cells released by men during ejaculation successfully enter the vagina and uterus so that it can reach the eggs that women released when ovulating. Without this fertilization process, there will be no pregnancy.

Thus, if the husband’s sperm does not enter the vagina (only in pants and then dries), then the possibility of pregnancy is almost impossible. It can be read in the process of fertilization related nausea and sulfur burps that it is experienced, can be caused by many causes. Here are some of them eating too much, gastritis or gastric inflammation, GERD or gastric acid disease, gastroenteritis or diarrheal syndrome due to food poisoning, appendicitis or appendicitis, too high sugar levels (hyperglycemia) or low (hypoglycemia), urinary tract infection, infection or kidney stones, etc.

sulfur burps

If it has checked into a doctor, do the treatment as recommended by the doctor. It can be consulted again when the symptoms of nausea and sulfur burps do not heal or control within the prescribed time. Some efforts to reduce nausea and burps eat regularly, if possible eat small portions but often (5-6 times a day) than eat at once in many portions, avoid foods that can irritate the stomach, such as too spicy, sour, oily, avoid caffeinated and alcoholic beverages, avoid exposure to cigarette smoke, enough rest, avoid stress, exercise regularly.

Soft drinks bring more wind to the stomach. When get sulfur burps after drinking soda, it is the wind coming out of the stomach, not the esophagus. The wind coming out of the stomach usually sounds louder and generally coupled with the smell.

Carbonated beverages usually cause exhaust gases as the body’s efforts remove air from the stomach. The burps from the stomach usually smells more, because the food is already digested. If belching is often accompanied by a feeling of nausea, heartburn and a bit of fluid from the stomach (spit up), there is a possibility you have gastro esophageal reflux disease (GERD) or better known as gastric acid disease.

 


Classification of Cervicalgia

Cervicalgia due to spinal disease is divided into several groups. They are different clinical manifestations, consequences, and features of tactical therapy. At the specifics of the pathological process is as follows the type of disease spondylogenic cervicalgia (vertebral). Developed violates bone integrity as a result of infection, osteoporosis, tumors, trauma. Pathological changes of bone irritate the nerves, which causes tonic seizures of the muscles in the neck and pain discogenic cervicalgia (true). It arises as a result of the destruction of the intervertebral disc – degenerative disc disease of the cervical spine. This reduces the height of the cartilage layer between the spines, reducing its elasticity, breaking the neurovascular bundle, which causes pain.

With flow properties is cervicalgia: acute – often occurs as a result of injury or dorsopathies, manifested by pain in the neck, chronic – occurs in the background from low-intensity infections, osteoporosis, slow-growing tumors, carotid artery disease, and is characterized by constant pain of low intensity.

Celvicalgia

Depending on the affected part by secreting the body: tservikokranialgiyu – involvement in the pathological process of the cerebral blood vessels, which manifests itself to violate the blood flow of the brain, cervicobrachialgia – poor circulation through the vessels of the upper limb, leading to impairment of sensory and motor function. The International Classification of Diseases ICD 10 code of M54.2 disease is assigned, except in cases of discogenic Cervicalgia, which is covered in the M50 group.

The main manifestation of this disease is pain, the intensity of which depends on the field of disease severity. The pain can occur in the form of tingling, burning, exploding, throbbing. Can be permanent or aggravated by movement. Usually in neck discomfort compounded when bending, twisting, as well as coughing, sneezing, laughing. Vertebrogenic cervicalgia is characterized by the following symptoms: pain in the cervical spine, enhanced by changes in head position, difficulty of movement in the neck, tension from the muscles of the neck, crisis in head movement, “Vatnost” in the neck, numbness of the hands, feeling of “crawling” tingling, reducing sensitivity to the fingers (if cervicobrachialgia), govokruzheniya, decreased visual acuity, tinnitus, nausea, numbness in the occipital region (in tservikokranialgiyu).


Child Fever with Red Hay Fever Rash, Alert Kawasaki Disease

Childhood fevers and hay fever rash in children are often considered trivial by most parents, but this symptom is one symptom of a disease of the heart and blood vessels that are vulnerable to small children: Kawasaki disease. Kawasaki disease attacks the arteries and causes inflammation or inflammation of the blood vessel wall throughout the body. In further cases, the disease may propagate into the coronary artery blood vessels, the blood vessels that carry blood to the heart, and lead to further heart and blood vessel diseases. Not only that, this disease also attacks lymph nodes, skin, and mucous membranes in the mouth, nose, and throat, so often referred to as mucocutaneous lymph node syndrome.

hay fever rash

The Kawasaki hay fever rash disease generally affects children under the age of five, often in the range of one to two years of age. Symptoms similar to diseases that are considered ‘mild’ make this disease often late diagnosed. According to a child heart consultant most new patients are treated when they are already in an acute sub phase, where there is a heart disorder. This is very risky considering the late handling will be fatal for the child.

Experts do not know exactly what causes Kawasaki hay fever rash disease, there are still too many possible causes of cardiovascular disease in this child. Most likely the disease is caused by a virus, judging by the characteristics of the symptoms caused. However, since the disease is not contagious, it seems the virus is not the only cause of the disease. Some studies suggest that Kawasaki’s disease is probably caused by an abnormal reaction to a particular virus. Other studies also say that this disease is an autoimmune disorder, in which the immune system in a child’s body thinks that body tissues are pathogens so that the tissues are attacked.


Pain under Floating Ribs

Someday, there are some people who feel pain in a bone or some bones in their body. Usually it comes suddenly and without something that cause that pain. Sometime after exercise we can get injury because of position mistake that we do, so it will make some pain in parts of our bone.It may feel the floating ribs pain in the left side around 2 more or less 3 weeks.

floating ribs

In the first day we get pain, we just think that is only the pain because of sleep position, so it will reduce soon. But, if the pain that we feel until more than 2 weeks, it may become something trouble in the body. This kind of pain make us feel pain when we take breathe. The pain like this make some contraction in the stomach.

The condition that is experiencing with the main complaints of pain the left chest can be caused by various things. However, if we focus more on if we exhale deeper chest pain, then our health problems may be related to lung organ. Here are some of the causes that can generally lead to the floating ribs pain that are just like we are experiencing, related to the lung organ, namely: pneumonia – inflammationof the lung, pleuritis – membrane lining, pleural effusion – collection of fluid in the lining of the lungs, tuberculosis, etc.

In addition to lung disorders, the floating ribs paincan be caused by acid stomach/GERD, gas accumulation in the gastrointestinal tract, heart attack, angina, psychological stress, etc. If until more than 3 weeks we still feel the symptoms, then the strongly recommended is immediately see the internal medicine specialist for a series of further tests. The doctor will likely perform several checks related to this issu which include physical examination – especially chest, heart/EKG recording, chest X-ray, blood test, etc. So, the exact cause of the emergence of this state is known and finally the right handling can be given.

 


Amazing Jeans Brands that You need to Know

The pieces in jeans are the most democratic in the closet and can be used on numerous occasions. Marked by versatility, it is possible to compose a basic look for day to day or more formal production for an important event, such as a job interview or a business meeting.

The jeans can have many variations that suit different situations, such as washing, cutting, and modeling. The possibility of creating totally different pieces with a single fabric made great brands fall into the public’s taste, not to mention the comfort and practicality that jeans provide.

Although the variety is large, it is not always easy to find a piece that has a perfect trim, especially when it comes to pants. The harder it is to find a pair of jeans with the correct length and that fits the waist, usually they end up going to the seamstress to lower the bar or make a pence.

 

There are many brands of jeans on the market today, some quite popular, such as the brands of fast fashion and other less known networks, but invest in differentials that add value to their parts. We made a selection with 10 incredible brands of jeans that deserve our attention and admiration. Check it!

Martins.tom

Launched in 2016, Martins.tom is a jeans brand created by designer Tom Martins and architect Bruno Dalto. The pieces of the brand are very different from what we see in stores, they have a wide modeling that fits several biotypes and is linked to street culture, which can be clearly seen in the way the brand communicates. The founders of Martins.tom chose jeans as a focus because the fabric is democratic and versatile. Another differential is low-scale production, aiming at exclusivity and encouraging slow fashion.

Amaro

The Amaro is a brand that focuses primarily on technology and buying online. There are some physical stores in the city of São Paulo, but they are far from conventional stores, the brand promises to deliver digital experiences within the offline environment. Amaro has new collection launches every week, which guarantees a huge variety, following the major fashion trends. At Amaro’s website, you find clothes for all occasions and your jeans catalog is quite complete. There are many options for all tastes.

Canton

Created in 1967 by the couple Leila Barreto and Peter Simon, the Cantão is a colorful, casual and stripped-down brand. The brand jeans are less ornate and with little complex washes, which ensures easier parts to match when composing the look. Canton has made several interesting partnerships, most recently with Bela Gil, who helped create pieces with fruit motifs, plants, and flowers with a touch of hand-made. The brand is present in more than one thousand multibrand throughout Brazil, in addition to more than 50 own stores. It also exports to countries like Australia, Portugal, Spain, Japan, United Arab Emirates and the United States.